Panerai Replicas, once strictly a military-issued timepiece, has become one of the most sought-after watches by enthusiasts and the fashion conscious. Designed for ruggedness and simplicity, Panerai Luminor Marina fake watches are often found to be equally at home with a suit or 200 meters beneath the ocean's surface. Winding of the Luminor Marina is normally manual, and the changing of straps is accomplished with a screwdriver. All of these normal operations are direct carryovers from the original models issued by the Italian Navy in the 1930s.

Crown Operation and Winding

The crown guard on the side of the watch assists in protecting the crown itself, as well as assisting in maintaining Panerai's renowned water-resistance. Open the crown guard by flipping it open with your thumb or forefinger. Leave the crown in its default position, winding the crown upward until the clutch stops the watch from continued winding.

Setting the Date and Time

Pull the crown to its first position. Rotate the crown until the previous day's date is shown. Pull the crown guard fully out. Rotate the crown until the date flips over to the current day's date. Continue rotating the crown until the correct time is shown. Refrain from changing the date without performing this method between 8 p.m. and 4 a.m. to avoid damage to the date wheel's gear structure.

Changing the Straps

Panerai makes strap changing easy on Luminor Marina models. There are two methods for doing so. The traditional method involves taking a 1.4 mm flat-head screwdriver and unscrewing the strap screws. Pull out the screw, insert the new strap, and insert the screw pin back in. Secure the screw with the flat-head screwdriver. The alternative method is to push down a release button on the bottom of the lugs, using the supplied two-piece tool. Push on the button with one side of the tool, while pushing the pin out with the other. Replace the pin by simply pushing it through the lugs and strap until the pin engages.